Home Network Setup

On this page I will describe the 4 variants or options that one has when connecting a home or small office network to the Internet via an ADSL or Cable modem. Carefully read the pros and cons of each method and decide what's best for you.
");
//]]>-->
Need Help with your Home Network Setup Right Now?

If you are having problems setting up or troubleshooting your home network Support.com is there to help you. Our Network Setup & Troubleshooting service puts all the pieces together. Establishing a secure home network is a daunting task. We'll take the hassle out of setting up your network by implementing the latest security precautions and connecting all of your devices to your router.
Support.com Free Estimate - Network Setup & Troubleshooting
document.context='YTowOnt9';
In this page I will not go into PC configuration details.
Home Network Setup Option 1: Everything hooked to a Hub or Switch
Pros
Simple setup
No server needed
Configure each PC manually
Cons
Maximum 4 PC's
Fixed IP addresses for all 4 PC's
Dial-in required per PC
No Proxy
Hub ports = the number of PC's + 1
Only one PC at a time can be connected to the Internet
With this home network setup we connect all Ethernet cables (PC and ADSL) to a hub or switch. The hub or switch can be any model UTP based hub preferably with a uplink/MDI crossed connector. You will need the uplink connector to connect the ADSL connector. If your hub does not come with such a connector, you should buy or prepare a UTP crossed-over network cable and use that instead. Your hub should have at least the amount of PC's plus 1 (ADSL) UTP ports.
Layout:
Internet Splitter 212.143.143.12 (Real IP from ISP - sample) Alcatel modem 10.0.0.138 (Crossed-over cable if hub doesn't have an uplink port) PC1-------------------Switching Hub-----------------------PC410.0.0.101 / \ 10.0.0.104 / \ / \ PC2 PC3 10.0.0.102 10.0.0.103
The ADSL cable goes to the splitter.
The ADSL modem is connected to the splitter.
The Ethernet cable from the modem either is connected to the uplink UTP connector of your hub, or - using a UTP crossed cable - to a regular UTP connector.
Each PC is connected to a regular UTP port of the hub/switch.
Each PC (maximum of 4!) should be configured as a ADSL client as described by your provider. Each PC should have an unique IP address.
Home Network Setup Option 2: Everything to the Hub or Switch - one of the PCs is a server
Pros
Simple setup
No manual PC configuration
Almost no limit to the number of PC's (254)
Dialup is done automatically
Proxy (WinRoute or similar)
Cons
Server software (NAT or Proxy) or Microsoft Internet Connection Sharing (ICS) required
Configuring the server can be difficult
Hub ports = number PC's + 1
This network setup is similar to variant 1 with one difference: we have a server which enables us to use a different IP range for PCs.
Layout:
Internet Splitter 212.143.143.12 (Real IP from ISP - sample) Alcatel modem 10.0.0.138 (Crossed-over cable if hub doesn't have an uplink port) PC1-------------------Switching Hub-----------------PC4 (SERVER)10.0.0.101 / \ 10.0.0.104 / \ / \ PC2 PC3 10.0.0.102 10.0.0.103
The ADSL cable goes to the splitter.
The ADSL modem is connected to the splitter.
The Ethernet cable from the modem either is connected to the uplink UTP connector of your hub, or - using a UTP crossed cable - to a regular UTP connector.
Each PC is connected to a regular UTP port of the hub/switch.
One of the PC's is to be configured as server either using software like WinRoute or Microsoft Internet Connection Sharing (Windows 2000, XP and ME have this standard included).
Home Network Setup Option 3: All PC's to a Hub or Switch - Server connected to ADSL
Pros
Simple setup
No manual configuration of PC's
Almost unlimited number of PC's (254)
Dialup done automatically
Separation between the Internet and the LAN
No uplink or crossed UTP cable required
Hub ports = number PC's
Proxy (WinRoute or similar)
Cons
Server software (NAT or Proxy) or Microsoft Internet Connection Sharing (ICS) required
Configuring the server can be difficult
Hub ports = number PC's + 1
Server needs additional network-card
Similar to option 1 and option 2 with the exception that the ADSL cable is connected to a server directly and from that server an second network connection is connected to the hub or switch. There are no limitations to the switch or hub used, this can even be a coax network if you would like so (this requires NO hub).
The ADSL network cable is connected to the server, which has 2 network-cards:
ADSL connection
LAN/hub connection
Layout:
Internet Splitter 212.143.143.12 (Real IP from ISP - sample) Alcatel modem 10.0.0.138 10.0.0.5 PC5 Server 192.168.0.5 PC1-------------------Switching Hub-----------------PC4 192.168.0.101 / \ 192.168.0.104 / \ / \ PC2 PC3 192.168.0.102 192.168.0.103
The ADSL cable goes to the splitter.
The ADSL modem is connected to the splitter.
The Ethernet cable from the modem is connected to the server.
The second network-card of the server is connected to the hub.
Each PC is connected to a regular UTP port of the hub/switch.
One of the PC's is to be configured as server either using software like WinRoute or Microsoft Internet Connection Sharing.
Home Network Setup Option 4: PC's and ADSL to Router/Switch
Pros
Simple setup
No manual configuration of PC's
Almost unlimited number of PC's (254)
Dialup done automatically
Separation between the Internet and the LAN
No uplink or crossed UTP cable required
Hub ports = number PC's
No server required
Cons
Routers can be expensive
Configuration of a router can be hard
Not all ADSL routers support RAS with VPN/PPTP
The router/switch (like the LinkSys models) is both a "server" for DHCP, firewall, DNS etc. and a hub in one.
Layout:
Internet Splitter 212.143.143.12 (Real IP from ISP - sample) Alcatel modem 10.0.0.138 10.0.0.1 PC1------------------Router / Switch-----------------PC4 192.168.0.101 / \ 192.168.0.104 / \ / \ PC2 PC3 192.168.0.102 192.168.0.103
The ADSL cable goes to the splitter.
The ADSL modem is connected to the splitter.
The Ethernet cable from the modem is connected to the router/switch.
All PC's are connected to the router/switch.
All you need to do is to configure the router for Internet Sharing.
Note: Some ADSL modems, such as the Alcatel SpeedTouch Pro, can function as routers between the Internet and the LAN. Read Upgrade from Alcatel SpeedTouch Home to Pro on how to configure your modem. In that case you will no longer require a router on your network:
Layout:
Internet Splitter 212.143.143.12 (Real IP from ISP - sample) Alcatel modem (Configured as a router) 10.0.0.138 PC1-------------------Switching Hub-----------------------PC410.0.0.101 / \ 10.0.0.104 / \ / \ PC2 PC3 10.0.0.102 10.0.0.103
The ADSL cable goes to the splitter.
The ADSL modem is connected to the splitter.
The ADSL modem is configured as a router.
The Ethernet cable from the modem is connected to the switching hub.
All PC's are connected to the switching hub.

Remember these are just a few of the options available in a home network setup.